产品中心

交流输入电抗器(ACR)ACInput Reactor

■产品概述product overview

进线电抗器可被用于给线路电源提供改进的过载保护，并能减少变频器产生的电流谐波失真。捉高输入电源的功率因素，减少高次谐波，抑制变频器在电源设备上的浪涌。进线电抗器可被用于给线路电源提供改进的过载保护，并能减少变频器产生的电流谐波失真。捉高输入电源的功率因素，减少高次谐波，抑制变频器在电源设备上的浪涌。

Incoming reactors can be usedto provide improved overload protection for line power suppliesand reduce current harmonic distortiongenerated by frequency converters.Improve the powerfactor of the input power supply,reduce high-order harmonics,and suppress surges of thefrequency converter on the power equipment.

■技术规格Technical specifications

·工作电压：220VAC-3300VAC
·工作频率：50/60Hz.
·工作电流：3A-1600A
·绝绿等级：classF,H
·防护等级：1P00-1P22
·压降：<4%大于此范围会引起转矩损失
·最大电流：1.5×额定电流，持续60S
·噪音：≤65dB
·温升：≤85K
·抗电强度：铁芯-绕组3000VAC/50Hz/5mA/10S无飞疆击穿(工厂测试)
·绝缘电阻：1000VDC绝蜂阻值≥100MO
-Working voltage:220VAC-3300VAC
·Operating frequency:50/60Hz
·Working current:3A-1600A
·Insulation level:ClassF,H
·Protection level:IP00-IP22
-Pressure drop:<4%.Exceeding this rangewill cause torqueloss
·Maximum current:1.5times rated current,lasting for 60seconds
·Noise:s65dB
·Temperaturerise:s85K
·Electrical strength:Iron core winding 3000VAC/50Hz/5mA/10S without fying fox breakdown(factory test)
·Insulation resistance:1000VDC insulation resistance≥100MQ

■执行标准Execution standards

+IEC289:1987 Reactor
·GB10229-88 Reactor
·JB9644-1999 Reactor used for semiconductor electricaldriving

■产品尺寸图product overview

3-380VAC 2%压降输入电抗器

备注：1.以上"A"代表绕组材质为铝，"℃"代表绕组材质为钢。
2.以上为我司常规的标准尺寸，具体参数订货时请联系我司业务人员；可非标定做。

变频输入端解决方案
Variablefrequency input solution

■变频器输入端电流波形图

3-690VAC 2%压降输入电抗器

备注：1.以上“A"代表绕组材质为铝，C"代表绕组材质为铜。
2.以上为我司常规的标准尺寸，具体参数订货时请联系我司业务人员；可非标定做。